Epson S5U1C17001C, Manual

Page: 79 / 742

S5U1C17001C ManUal
EPSOn
3-49
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
3 SOfTWarE DEVElOPMEnT PrOCEDUrES
3
SoftDev
3.4.3 Disabling the gnU17 file Builder
The
IDE
is initialized to automatically generate makefiles, linker script files, parameter files, and debugger com-
mand files and to use these files when building a project or starting the debugger. In this tutorial, since we use sepa-
rately prepared files, we need to change the default
IDE
settings to keep from using these files.
The following describes how to disable the file builder to prevent automatic generation of these files.
Step 12 : After selecting the "
mymake_sample
" project from the [Navigator] or the [C/C++ Projects] view, se-
lect [Properties] from the [Project] menu or context menu to display the [Properties] dialog box.
Step 13
: Select [Builders] from the properties list and deselect the [GNU17 File Builder] check box. A dialog box
below appears for confirmation. Click [OK].
Step 14 : Click the [OK] button.
You can use your own makefiles, linker script files, parameter files, and debugger command files even without tak-
ing this step, but unnecessary files will be generated each time you build a project. Additionally, the automatically
generated files will overwrite any current files with the same names.
Do not disable the file builder if any of the above files must be automatically generated by the
IDE
.