Epson S5U1C17001C, Manual

Page: 577 / 742

10-126
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10.7.15 flash Writer Commands
c17 fwe
(erase program/data) [ICD Mini]
Operation
This is a dedicated command for the flash writer of the S5U1C17001H.
It erases the data erase/write program or write data and address information loaded in the S5U1C17001H.
Format
c17 fwe 0
(erases write data.)
c17 fwe 1
(erases data/erase write program.)
Usage example
n
Example 1
(gdb) c17 fwe 0
The storage area for flash write data and the address information in the S5U1C17001H are erased.
n
Example 2
(gdb) c17 fwe 1
The storage area for the flash erase/write program and the entry information in the S5U1C17001H are erased.
Notes
• This command cannot be used in simulator mode.
• This command can be used with the ICD Mini (S5U1C17001H). It cannot be executed normally with the
ICD board (an error message will not be displayed).
• Some models do not allow the setting of a desired flash erasure range. For such models, make a setting for
the erasure of all blocks. To determine whether or not it is possible to set a desired flash erasure range, refer
to
readme_x.txt
in the fls folder (
\gnu17\mcu_model\
MODEL NAME
\fls
) for the model in
question.