Epson S5U1C17001C, Manual

Page: 505 / 742

S5U1C17001C ManUal
EPSOn
10-55
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10
Debugger
Map breaks and breaks by invalid instruction execution (simulator mode)
The program is also made to break when accessing an invalid area.
notes : • The following breaks are only effective in simulator mode.
• A memory map-related break occurs according to the memory map information set by a
parameter file loaded by the
c17 rpf
command. An unexpected break may occur unless the
loaded parameter file is correct.
Writes to the rOM area
The program is made to break after writing to the ROM area set by a parameter file. When this break occurs,
the following message is output:
Break by writing ROM area.
access to an undefined area
The program is made to break when accessing an undefined area other than those mapped by a parameter file.
Break by accessing no map.
Stack overflow
The program is made to break after writing to a stack exceeding the stack area set by a parameter file, thus
causing it to overflow.
Break by stack overflow.
Execution of an invalid instruction
The program is made to break when executing an invalid instruction (not generated by the assembler).
Illegal instruction.
Execution of an invalid address instruction
The program is made to break when executing an instruction at an invalid address.
Illegal address exception.
Execution of an invalid delayed instruction
The program is made to break when executing an invalid delayed instruction.
Illegal delayed instruction.