Epson S5U1C17001C, Manual

Page: 292 / 742

5-170
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
5 gnU17 iDE
5.8.3 Starting Up the Debugger
You can start debugging when the executable file (.elf) is generated by a build operation and the preparations de-
scribed in the preceding sections are complete.
first debugging session
Described below is the procedure for launching the debugger for the first time for the current project.
(1) Do one of the following:
• Select [External Tools] > [External Tools Configurations...] from the [Run] menu.
• Select [External Tools Configurations...] from the [External Tools] shortcut in the window toolbar.
This displays the [External Tools Configurations] dialog box.
(2) Select [GDB17 Launch for
<project name>
] from the tree list.
*
${gnu17_loc} is resolved to the full path for \gnu17 (e.g., C:/EPSON/gnu17) in the current user environment.
(3) Modify the [Arguments:] (arguments to the debugger command line) as necessary.
If you are using the
IDE
-generated command file to start the debugger, no changes are needed.
All other settings in this dialog box should also be left unchanged.
(4) Click the [Run] button.
The
gdb
debugger will launch, executing the specified command file.
For subsequent debugger operations, refer to Chapter 10, "Debugger".