Epson S5U1C17001C, Manual

Page: 479 / 742

S5U1C17001C ManUal
EPSOn
10-29
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10
Debugger
10.4.7 [Watch Expressions] Window
The [Watch Expressions] window is used to monitor the values of global symbols and registers.
Menus
[Watch] menu
Edit
Places a symbol selected in the window into edit mode. While in this state, you can change the
value of that symbol.
format
Selects the format in which you wish to display the symbol value selected in the window.
Hex: Hexadecimal
Decimal: Signed decimal
Binary: Binary
Octal:
Octal
Natural: Common representation for the data type (e.g. decimal for
int
type
values, hexadecimal for pointers) (default)
remove
Deletes a symbol selected in the window from the watch list.
Note: When the GDB is closed, the display format set with the set output-radix command is saved. On
the subsequent GDB startup, the display will retrieve the saved display format in place of the
default format.
Contents displayed
The names and values of symbols registered in the watch list are displayed.
Changing any symbol value during program execution updates the corresponding symbol value displayed in the
window. Symbol values are not updated when changed by a command, etc.
When the symbol is an array or pointer, a [+] sign is displayed
before the symbol name. Clicking the symbol changes the sign to
[-] and displays information in the array or content of the address
indicated by the pointer.