Epson S5U1C17001C, Manual

Page: 658 / 742

S5U1C17001C ManUal
EPSOn
11-31
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
11 OTHEr TOOlS
11
Tools
11.8 Outline of the Development Tools
The S1C17 C Compiler Package contains the tools to create mask option and mask data files, as well as files that
contain descriptions of setup information for each type of microcomputer. The tools below are Windows GUI
applications that run under Windows 2000, Windows XP, or Windows Vista versions.
1. function option generator <winfog17.exe>
The winfog17 creates the function option document file that is necessary to generate IC mask patterns after
selecting the mask options of the S1C17xxx. You can create function option data by selecting the appropriate
item using the check boxes. Refer to Section 11.9 for details.
2. Mask data checker <winmdc17.exe>
The winmdc17 checks the data in development-completed built-in ROM file and option document file to create
the mask data file that will be presented to Seiko Epson. Refer to Section 11.10 for details.
3. Device information definition file <S1C17xxx.ini>
This file is used to set information, such as the configuration of options, on each type of microcomputer for the
tools described above. This file must be available before each tool can be executed.
note
: There is no difference between each tool between the different types of microcomputers.
Therefore, the explanations in this manual are for all types of microcomputers using "S1C17xxx"
as the representative name. The contents of the sample screens shown in this manual vary
according to the type of microcomputer.
For the mask data generation procedure including creation of a internal ROM data filer, refer to Section 3.3.7,
"Creating ROM Data".