Epson S5U1C17001C, Manual

Page: 556 / 742

10-106
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
ignore
(disable breakpoint with ignore counts) [ICD Mini / SIM]
Operation
Disables a specific break the number of times specified by a break hit count.
Format
ignore BreakNo Count
BreakNo : Break number (decimal)
Count : Number of break hits to be disabled (decimal or hexadecimal)
Usage example
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y 0x00c0003c in sub at main.c:22
2 breakpoint keep y 0x00c00030 in main at main.c:14
(gdb)
ignore 2 2
Will ignore next 2 crossings of breakpoint 2.
Break number 2 is disabled twice.
(gdb) continue
Continuing.
Breakpoint 1, sub (k=1) at main.c:22
(gdb) continue
Continuing.
Breakpoint 1, sub (k=1) at main.c:22
(gdb) continue
Continuing.
Breakpoint 2, main () at main.c:14
Although the target program passes through the breakpoint twice as it is run twice (by
continue
) above, no
break occurs. A break occurs when running the program a third time because the breakpoint is reenabled.
Notes
• Break numbers are sequentially assigned to each breakpoint when set, beginning with 1. If you do not know
the break number of a breakpoint you wish to disable, use the
info breakpoints
command to confirm
as in the example above.
• Count is used to count the number of times a specific break is hit, and not the number of times the target
program is run. The count is not decremented unless the program passes through a specified breakpoint.
• The
ignore
command cannot be used to collectively disable multiple breakpoints.
• Note that specifying a break number not set displays the "No breakpoint number N." message, with program
execution being aborted.