Epson S5U1C17001C Manual Download Page 689

Page: 689 / 742

11-62

EPSOn

S5U1C17001C ManUal

(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)

11 OTHEr TOOlS

4-2) The [COM/SEG] dialog box appears.

COM, SEG

Select from the pull-down list. COM/SEG allocation is applied immediately after the change is made.

[Reset] button

Click this button to clear COM/SEG settings and set COM/SET in the “not set” state.

Driver

Indicates the name of the currently set LCD driver. This cannot be changed.
The maximum COM/SEG value is set by the LCD driver.

Uninitialized data

You can initiate settings if you click an icon for which no COM/SEG has been set.

No operation

The COM/SEG information will not be changed.

Copy COM and SEG

The displayed COM/SEG information will be set to the icon.

Increment COM

The COM will be incremented (+1) and set to the displayed COM/SEG
information.

Increment SEG

The SEG will be incremented (+1) and set to the displayed COM/SEG
information.

Note: The port allocation information is discarded if you copy and paste an icon or move an icon from

another panel editing window. Dot matrices without allocation information appear in black.

Summary of Contents for S5U1C17001C







































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S5U1C17001C

Reviews:

Related manuals for S5U1C17001C

Brands by name

Popular brands

Epson S5U1C17001C, Manual

Search results

Summary of Contents for S5U1C17001C

Reviews:

Related manuals for S5U1C17001C

Brands by name

Popular brands