Epson S5U1C17001C, Manual

Page: 578 / 742

S5U1C17001C ManUal
EPSOn
10-127
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10
Debugger
c17 fwlp
(load program) [ICD Mini]
Operation
This is a dedicated command for the flash writer of the S5U1C17001H.
It loads the data erase/write program from the host into the S5U1C17001H.
Format
c17 fwlp Filename EraseEntryAddr WriteEntryAddr
[
Comment
]
Filename : Name of data erase/write program file (Motorola S3 format file)
EraseEntryAddr : Erase routine entry address (RAM address on the CPU side, in decimal or hexadecimal)
WriteEntryAddr : Write routine entry address (RAM address on the CPU side, in decimal or hexadecimal)
Comment : Comments to identify data/address information (may be omitted)
Conditions: 0
≤
EraseEntryAddr
≤
0xfffffe (A0 = 0 ), 0
≤
WriteEntryAddr
≤
0xfffffe (A0 = 0 ),
0
≤
comment size
≤
128 bytes
Usage example
(gdb) c17 fwlp writer.sa 0x90 0xb4
The data erase/write program for the flash writer (prepared in file
writer.sa
) is loaded in the S5U1C17001H,
and start addresses of the erase and write routines are set to 0x90 and 0xb4, respectively.
Notes
• This command cannot be used in simulator mode.
• This command can be used with the ICD Mini (S5U1C17001H). It cannot be executed normally with the
ICD board (an error message will not be displayed).
• The data erase/write program is 8KB or less in size.
• For the value of EraseEntryAddr/WriteEntryAddr, refer to “readme_e.txt” located at mcu_model\MODEL
NAME\fls.