Epson S5U1C17001C, Manual

Page: 618 / 742

S5U1C17001C ManUal
EPSOn
10-167
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10
Debugger
10.11.2 Starting and Terminating ES-Sim17
Starting up ES-Sim17
The debugger launches the ES-Sim17 when the following two conditions are met:
1. The parameter file read in the debugger has the comment below.
ESSIM
<model name>
Example:
ESSIM S1C17701
When the parameter file is created by the
IDE
, this comment is written to it according to the target
processor selected.
2. The
target sim
command (to set the debugger in simulator mode) is executed.
When the
ES-Sim17
starts up, the [ES-Sim] window appears.
Terminating ES-Sim17
The ES-Sim17 terminates in the following two cases:
1. When the
detach
command is executed in the debugger
2. When the debugger is terminated
Opening/closing the [ES-Sim] window
The [ES-Sim] window can be closed by clicking the [Close] button. (This operation does not terminate the ES-
Sim17 .)
To reopen the window, execute \essim17\ EssWnd.exe . Note, however, that the ES-Sim17 must be running at
that point. If the ES-Sim17 has already terminated, execute the
target sim
command again.
The [ES-Sim] window cannot be opened twice. If you attempt to open the window when it is already opened,
the [ES-Sim] window moves to the foreground but a new window does not appear.