Epson S5U1C17001C, Manual

Page: 633 / 742

11-6
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
11 OTHEr TOOlS
Path descriptions in a make file
The make file supports descriptions in the cygwin format (or UNIX format). Therefore, the following
precautions should be taken especially when a path is described.
1) Drive name and delimiter in path
"
\
" used in Windows must be replaced with "
/
". Additionally, write the drive name in the format "
/cygdrive/
<drive name>
/
".
Example:
c: /EPSON/gnu17/sample/tst/boot.o : c: /EPSON/gnu17/sample/tst/boot.s
as –o boot.o c:/EPSON/gnu17/sample/tst/boot.s
↓
/cygdrive/c /EPSON/gnu17/sample/tst/boot.o : /cygdrive/c /EPSON/gnu17/sample/tst/boot.s
as –o boot.o c:/EPSON/gnu17/sample/tst/boot.s
If a drive name is written in the form " <drive name>
:
", an error will result when make is executed.
However, when entering a command line for Windows such as an assembler, you can use the " <drive
name>
:
" format to write the path to be specified as a command line parameter.
2) Space
Make sure any spaces within a directory or file name is preceded by a "
\
".
Example:
Tool Folder
→
Tool\ Folder
3) Case sensitive
Directory and file names are case sensitive. Be sure to check upper/lower case for path descriptions.
Also the make.exe allows descriptions of relative paths from the current directory in which the make.exe is
invoked.
Example:
.libraries/lib1.a
Comments
A statement from # to the end of the line is regarded as a comment.