Epson S5U1C17001C, Manual

Page: 260 / 742

5-138
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
5 gnU17 iDE
automatic updating of object files (for standard sections)
The standard section enables an automatic updating feature for the object files to be located in the sections.
Since the linker script will automatically update itself whenever source files are added/removed, there is no
need to manually reconfigure these sections.
The following describes the handling of object files in automatic updating.
If no other sections have the same attribute
The object files for the project and the libraries already set in build options are all selected and located in
that section.
If there are multiple sections with the same attribute
The object files and libraries not located in other user sections with the same attribute are selected and lo-
cated in that standard section. Files already located in user sections with the same attribute are not handled
in automatic updating.
In user sections, the files included in other sections with the same attribute can also be added by selecting from
the unselected file list. When a file is relocated from one section to another, it is removed from the section in
which it was located up to that point.
The following limitations apply to standard sections in which automatic updating is enabled:
1. The section attribute ([File Attributes]) cannot be changed.
2. The file list can only be referenced; it cannot be manipulated.
3. Object files are added in ascending alphabetical order.
If these changes need to be made, create a user section.
adding a section
Follow the procedure described below to add a new section.
(1) Click the [Add] button. This displays the [Add Section] dialog box.
(2) Make the necessary settings based on the
above discussion. Click [OK].
(3) Click the [Apply] button to change other
sections or properties or the [OK] button to
end property settings.
If you haven't clicked [Apply], you can use the
[Revert Settings] button to discard the changes
made and restore the status in which this page
was opened.
The section is inserted into the list according to
the VMA you set.
To ensure that the new section location or
objects will not overlap with another section,
review the other section information, making
alterations, if necessary.