Epson S5U1C17001C, Manual

Page: 240 / 742

5-118
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
5 gnU17 iDE
5.7.4 Setting assembler Options
Do the following to set assembler command options.
(1) Select a project to build in the [C/C++ Projects] or [Navigator] view.
(2) Select [Properties] from the [Project] menu, or select the context menu from the above view.
This displays the [Properties] dialog box.
(3) Select [GNU17 Build Options] from the properties list.
(4) Select [Assembler] from the [Build Options] tree.
The [Command:] field shows the program name of the compiler*, and the [All Options] field lists the currently set
options.
Note: When the -c -xassembler-with-cpp option is specified, the IDE assembles the assembler
source using the specified C compiler. It is not necessary to specify the compiler -c option or
-xassembler-with-cpp option to All Options.
(5) Select [General] from the [Assembler] tree list and set the necessary options.
(6) Click the [Apply] button to change other properties or the [OK] button to complete property settings.
If settings in a [GNU17 Build Options] page have been changed, a dialog box appears for selecting "
clean
"
build (see Section 5.7.8) to delete the files created with the previous settings (and rebuild).
If you haven't clicked [Apply], you can use the [Revert Settings] button to discard the changes made and restore
the state in which this page was opened.
Shown below are the pages in which assembler options are set. For detailed information on the options, refer to the
section that discusses the assembler.