Epson S5U1C17001C, Manual

Page: 711 / 742

Reference
Assembler as (2) Development Tools
Error/Warning Messages
Error messages
Unrecognized opcode: ' XXXXX ' The operation code XXXXX is undefined.
junk at end of line: '
XXXXX
A format error of the operand.
XXXXXX : invalid register name The specified register cannot be used.
operand out of range The value specified in the operand is out of the
( XXXXXX : XXX not between AAA and BBB ) effective range.
There are too many characters of one The number of characters (except for a new line
line in assembler source file. character) in an assembler source line has exceeded
2,047 characters.
Cannot allocate memory. Memory allocation by
malloc()
has failed.
Cannot specify plurality source files. More than one source file name is specified in the
command line.
Cannot find the dump file. A dump file name is not specified even though the
-mc17_ext
option is specified. Or the specified
dump file does not exist.
Cannot find the map file. A map file name is not specified even though the
-mc17_ext
option is specified. Or the specified map
file does not exist.
The format of the dump file is invalid. The contents in the dump file specified with the
-mc17_ext
option are invalid.
The format of the map file is invalid. The contents of the map file specified with the
-mc17_ext
option are invalid.
Cannot close the map file. The map file specified with the
-mc17_ext
option
cannot be closed after it has been read.
There are too many characters of one The number of characters (except for a new line
line in dump file. character) in a line of the dump file specified with the
-mc17_ext
option has exceeded 2,047 characters.
There are too many characters of one The number of characters (except for a new line
line in map file. character) in a line of the map file specified with the
-mc17_ext
option has exceeded 2,047 characters.
Error: Value of XXXX too large for field of The address of the label located XXXX bytes from
AAA bytes at BBB
the beginning of the .text session is too large. This
label is referenced by the AAA-byte symbol table
located BBB bytes from the beginning of the .rodata
session.
Warning messages
Unrecognized .section attribute: The section attribute is not
a
,
w
or
x
.
want a, w, x
Bignum truncated to
AAA bytes The constant declared (e.g.
.long
,
.int
) exceeds
the maximum size. It has been corrected to
AAA
-byte
size.
Value
XXXX
truncated to
AAA
The constant declared exceeds the maximum value
AAA . It has been corrected to AAA .