&
&
&
E-1
Solutions:
❏
Make sure the Ethernet cable is securely connected to your printer and to your hub or other network device.
❏
Make sure your hub or other network device is turned on.
E-8
Solutions:
❏
Enable DHCP on the router if the printer’s Obtain IP Address setting is set to Auto.
❏
If the printer’s Obtain IP Address setting is set to Manual, the IP address you manually set is invalid due to out
of range (for example: 0.0.0.0). Set a valid IP address from the printer’s control panel.
Related Information
&
“Network Settings” on page 191
E-9
Solutions:
Check the following.
❏
Devices are turned on.
❏
You can access the Internet and other computers or network devices on the same network from the devices you
want to connect to the printer.
If still does not connect your printer and network devices after confirming the above, turn off the router. Wait for
about 10 seconds, and then turn it on. Then reset your network settings by downloading and running the installer
from the following website.
Setup
Related Information
&
“Making Settings for Connecting to the Computer” on page 137
E-10
Solutions:
Check the following.
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
140