❏
PDF Page Size
Select the paper size when printing a PDF file. If
Auto
is selected, the paper size is
determined based on the size of the first page.
Auto Error Solver:
Select an action to perform when a 2-sided printing error or a memory full error occurs.
❏
On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints
only what the printer could process when a memory full error occurs.
❏
Off
Displays an error message and cancels printing.
PC Connection via USB:
Select
Enable
to allow a computer to access the printer when connected by USB. When
Disable
is
selected, printing that is not sent over a network connection is restricted.
USB I/F Timeout Setting:
Specify the length of time in seconds that must elapse before ending USB communication with a
computer after the printer receives a print job from a PostScript printer driver or PCL printer driver.
If the job ending is not clearly defined from a PostScript printer driver or PCL printer driver, it can
cause endless USB communication. When this occurs, the printer ends communication after the
specified time has elapsed. Enter 0 (zero) if you do not want to end communication.
Printer Swapping:
If you select On, the USB device ID is fixed and the plug and play screen will not be displayed when
the printer is replaced.
Network Settings
Select the menus on the control panel as described below.
Settings
>
General Settings
>
Network Settings
Network Status:
Displays or prints the current network settings.
❏
Wired LAN Status
❏
Print Status Sheet
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏
Device Name
❏
TCP/IP
❏
Proxy Server
>
>
191