Note:
When you select
Auto
for the IP address assignment settings, you can select the DNS server settings from
Manual
or
Auto
. If you cannot obtain the DNS server address automatically, select
Manual
and enter the DNS server address.
Then, enter the secondary DNS server address directly. If you select
Auto
, go to step 11.
10. Enter the IP address for the secondary DNS server.
Confirm the value reflected on the previous screen.
11. Select
Start Setup
.
Setting the Proxy Server (When Using an Additional Network)
Set up the proxy server if both of the following are true.
❏
The proxy server is built for Internet connection.
❏
When using a function in which a printer directly connects to the Internet, such as Epson Connect service or
another company's cloud services.
The proxy server is only available on the standard network.
1.
Select
Settings
on the home screen.
When making settings after IP address setting, the
Advanced
screen is displayed. Go to step 3.
2.
Select
General Settings
>
Network Settings
>
Standard
>
Advanced
.
3.
Select
Proxy Server
.
4.
Select
Use
for
Proxy Server Settings
.
5.
Enter the address for the proxy server by IPv4 or FQDN format.
Confirm the value reflected on the previous screen.
6.
Enter the port number for the proxy server.
Confirm the value reflected on the previous screen.
7.
Select
Start Setup
.
Connecting to Ethernet (When Using an Additional Network)
Connecting to Ethernet on the Standard Network
Connect the printer to the standard network by using an Ethernet cable, and then check the connection.
1.
Connect the printer and hub (LAN switch) by Ethernet cable.
2.
Select
Settings
on the home screen.
>
Ethernet Board (10/100/1000 Base-T, Ethernet) (AL-M8250DN/AL-M8150DN Only)
>
171
