Making Settings for Processing Saved Data
You can make settings for processing data stored in the internal hard disc.
Jobs for printing are temporarily saved to the hard disc in order to handle the data for authenticated printing and
the large amount of printing, etc. Make settings to safely erase this data.
Sequential Deletion from Hard Disk
When enabled, the target data is erased sequentially when it becomes unnecessary, such as when printing is
completed. The target to be deleted is data written while this function is enabled.
Because access to the hard disc is necessary, the time to enter power saving mode will be delayed.
Erase All Memory
Erases all data on the hard disc. You cannot perform other operations or turn off the device during formatting.
❏
High Speed: Erases all data with a dedicated erase command.
❏
Overwrite: Erases all data with a dedicated erase command, and overwrites other data in all areas to erase all
data.
❏
Triple Overwrite: Erases all data with a dedicated erase command, and overwrites other data in all areas three
times to erase all data.
Making Settings for Sequential Deletion
Note:
You can also make settings from the device's control panel.
1.
Access Web Config and select the
Device Management
>
Stored Data
.
2.
Select
ON
for
Sequential Deletion from Hard Disk
.
3.
Click
OK
.
Formatting the Internal Hard Disc
1.
Select
Settings
on the home screen on the printer's control panel.
2.
Select
General Settings
>
System Administration
>
HDD Erase Settings
.
3.
Select
Erase All Memory
.
4.
Select
High Speed
,
Overwrite
, or
Triple Overwrite
according to the purpose.
5.
Select
Yes
on the confirmation screen.
>
HDD (AL-M8250DN/AL-M8150DN Only)
>
Making Settings for Processing Saved Data
164
