Epson AL-M7150DN User Manual Download Page 174

Page: 174 / 296

Standard:

Set up the standard network. See Related Information below.

Related Information

“Network Settings” on page 191

Additional:

Set up the additional network.

Network Status:

Displays or prints the current network settings.

❏

Wired LAN Status

❏

Print Status Sheet

Advanced:

Make the following detailed settings.

❏

TCP/IP

❏

IPv6 Address

❏

Link Speed & Duplex

❏

Redirect HTTP to HTTPS

❏

Disable IPsec/IP Filtering

❏

Disable IEEE802.1X

You need to enter the administrator password for the additional network.

Restore Default Settings:

Reset the settings for the additional network to their defaults.

You need to enter the administrator password for the additional network.

Network Transmission Route:

This menu is unavailable.

LDAP Server:

This menu is unavailable.

Using Optional Items

Ethernet Board (10/100/1000 Base-T, Ethernet) (AL-M8250DN/AL-M8150DN Only)

…

174

Summary of Contents for AL-M7150DN









































































































































































































































































































Search results

Summary of Contents for AL-M7150DN

Reviews:

Related manuals for AL-M7150DN

Brands by name

Popular brands

Epson AL-M7150DN, User Manual

Search results

Summary of Contents for AL-M7150DN

Reviews:

Related manuals for AL-M7150DN

Brands by name

Popular brands