4.
Enter the email address for sending the notification email.
Use A-Z a-z 0-9 ! # $ % & ' * + - . /= ? ^ _ { | } ~ @, and enter between 1 and 255 characters.
5.
Select
Standard
or
Additional
for the network used to send to recipients.
6.
Select the language for the email notifications.
7.
Select the check box on the event for which you want to receive a notification.
The number of
Notification Settings
is linked to the destination number of
Email Address Settings
.
Example :
If you want a notification sent to the email address set for number 1 in
Email Address Settings
when the
printer is out of paper, select the check box column
1
in line
Paper out
.
8.
Click
OK
.
Confirm that an email notification will be sent by causing an event.
Example : Print by specifying the Paper Source where paper is not set.
Related Information
&
“Application for Configuring Printer Operations (Web Config)” on page 221
&
“Configuring a Mail Server” on page 235
&
“Items for Email Notification” on page 253
Solving Problems when Using an Additional Network
Cannot Print from a Computer
The standard or additional network settings are incorrect.
You need to set up the standard network and the additional network. Check the settings for both networks.
Related Information
&
“Connecting to the Network from the Control Panel (When Using an Additional Network)” on page 170
Menu Options for Network Settings (When Using an Additional
Network)
This section explains the Network Settings menu when using the additional network.
Select the menus on the control panel as described below.
Settings
>
General Settings
>
Network Settings
>
Ethernet Board (10/100/1000 Base-T, Ethernet) (AL-M8250DN/AL-M8150DN Only)
>
173