Epson AL-M7150DN User Manual Download Page 130

Page: 130 / 296

The printer driver settings need to be changed (Windows).

Solutions

Select the

Maintenance

tab >

Extended Settings

, and then set

Printer Control Language

ESC/Page (-

Color)

Select the

More Options

tab, select

Custom

from the

Tone Correction

, and then select

Advanced

. Select

Enh.MG

, and then move the slider to the

Light

side.

The density setting has been changed in the printer driver (Windows).

Solutions

Select the

More Options

tab >

Extended Settings

, and then adjust the

Density

setting.

The Charging Roller Voltage setting has been changed on the printer.

Solutions

Select

Settings

General Settings

System Administration

Printer Adjust Menu

, and then change

the

Charging Roller Voltage

setting.

Drum Refresh with paper needs to be performed.

Solutions

Select

Settings

General Settings

System Administration

Printer Adjust Menu

, and then select

Drum Refresh with paper

The Position, Size, or Margins of the Printout Are Incorrect

The following causes can be considered.

The paper is loaded incorrectly.

Solutions

Load paper in the correct direction, and slide the edge guide against the edge of the paper.

“Loading Paper” on page 32

The size of the paper is set incorrectly.

Solutions

Select the appropriate paper size setting.

Solving Problems

Print Quality is Poor

130

Summary of Contents for AL-M7150DN









































































































































































































































































































Search results

Summary of Contents for AL-M7150DN

Reviews:

Related manuals for AL-M7150DN

Brands by name

Popular brands

Epson AL-M7150DN, User Manual

Search results

Summary of Contents for AL-M7150DN

Reviews:

Related manuals for AL-M7150DN

Brands by name

Popular brands