Making Settings for Connecting to the Computer
We recommend using the installer to connect the printer to a computer. You can run the installer using one of the
following methods.
❏
Setting up from the website
Access the following website, and then enter the product name. Go to
Setup
, and then start setting up.
❏
Setting up using the software disc (only for the models that come with a software disc and users with Windows
computers with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Follow the on-screen instructions.
Changing the Connection Method to the Computer
This section explains how to change the connection method when the computer and the printer have been
connected.
Changing from USB to a Network Connection
Using the installer and re-set up in a different connection method.
❏
Setting up from the website
Access the following website, and then enter the product name. Go to
Setup
, and then start setting up.
❏
Setting up using the software disc (only for the models that come with a software disc and users with Windows
computers with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Select the network connection that you want to use,
Connect via wireless network (Wi-Fi)
or
Connect via wired
LAN (Ethernet)
, and then click
Next
.
Note:
The displayed connection method differs depending on the model.
Follow the on-screen instructions.
Checking the Network Connection Status
You can check the network connection status in the following way.
Related Information
&
“Checking the Network Connection Status from the Control Panel” on page 138
&
“Printing a Network Connection Report” on page 138
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
137