Endress+Hauser Liquiline System CA80PH Operating Instructions Manual Download

Page: 16 / 208

Incoming acceptance and product identification

Liquiline System CA80PH

Hauser

Incoming acceptance and product identification

4.1

Incoming acceptance

1. Make sure the packaging is undamaged.



Inform the supplier about any damage to the packaging.

Keep the damaged packaging until the matter has been settled.

2. Make sure the contents are undamaged.



Inform the supplier about damage to the contents.

Keep the damaged products until the matter has been settled.

3. Check that the delivery is complete and nothing is missing.



Compare the scope of delivery against the delivery papers and your order.

4. Pack the product in such a way as to protect it reliably against impact and moisture for

storage and transportation.



The original packaging offers the best protection.

Keep to the approved ambient conditions (see "Technical data").

If you have any questions, contact your supplier or your local sales center.

NOTICE

Incorrect transportation can damage the analyzer

‣

Always use a lifting truck or a fork-lift to transport the analyzer.

Summary of Contents for Liquiline System CA80PH

















































































































































































































Search results

Summary of Contents for Liquiline System CA80PH

Reviews:

Related manuals for Liquiline System CA80PH

Brands by name

Popular brands

Endress+Hauser Liquiline System CA80PH, Operating Instructions Manual

Search results

Summary of Contents for Liquiline System CA80PH

Reviews:

Related manuals for Liquiline System CA80PH

Brands by name

Popular brands