Emerson Rosemount CT5400, Installation, Operation And Maintenance Manual

Page: 38 / 176

Status outputs, 10 way socket (H)
(continued)
Table 2-1:
Pins Function
4-9 Status output 4 (failed), optional
Digital outputs, 16 way socket (G) Table 2-2:
Pins Function
1-9 Reading valid channel 0, set in config file
2-10 Reading valid channel 1, set in config file
3-11 Reading valid channel 2, set in config file
4-12 Reading valid channel 3, set in config file
5-13 Reading valid channel 4, set in config file
6-14 Reading valid channel 5, set in config file
7-15 Reading valid channel 6, set in config file
8-16 Reading valid channel 7, set in config file
Analog outputs, 16 way socket (F) Table 2-3:
Pins Function
1-9 Analog channel 0, set in config file
2-10 Analog channel 1, set in config file
3-11 Analog channel 2, set in config file
4-12 Analog channel 3, set in config file
5-13 Analog channel 4, set in config file
6-14 Analog channel 5, set in config file
7-15 Analog channel 6, set in config file
8-16 Analog channel 7, set in config file
CAUTION!
EQUIPMENT DAMAGE
Make sure that the mains supply cable used is of a suitable rating for the unit power
requirements. Failure to do so may result in damage to property.
The Ethernet connector ( Figure 2-5 , A) provides an Ethernet output from the instrument
that may be used for downloading data for failure diagnosis purposes.
The results of the gas analysis are output from the instrument through the 4-20 mA analog
outputs (
Figure 2-5 , F) and sent to your process control center.
Install
18 Rosemount CT5400