2
Install
2.1
Site selection
WARNING!
HEAVY ITEM
Handle the analyzer with caution during unpacking, installing, maintaining, and transporting
to prevent crushing of hands, feet, or other body parts.
The analyzer weighs 31 kg (68 lb). Emerson
™
recommends that the analyzer is only moved and
lifted by a minimum of two people. Wear suitable protective gloves and protective footwear.
Failure to properly handle the analyzer may cause injury to personnel.
Procedure
1.
Install the analyzer in a standard 482.6 mm (19 in.) rack.
NOTICE
Fitting the analyzer into the rack and securing it are your responsibilities.
2.
Install the analyzer in a suitable shelter to protect it from environmental elements
and water. The Ingress Protection rating (IP) for the analyzer is IP-44 per the IEC
60529 standard.
DANGER!
FLAMMABLE SUBSTANCES
Some parts of the analyzer may reach temperatures of 190 °C (374 °F) and may present
an ignition source. Exercise care when using oil, paint, cleaning rags, and other
flammable substances near the analyzer. A fire may result if this precaution is not
observed. Always assume that the interior of a analyzer is hot unless it has been
switched off and allowed to cool down.
Install
Installation, Operations, and Maintenance Manual
13
Summary of Contents for Rosemount CT5400
