Emerson Rosemount CT5400, Installation, Operation And Maintenance Manual

Page: 37 / 176

2.4 Connecting the electrical/electronic inputs and
outputs
Electrical / Electronic Connectors Figure 2-5:
A. Ethernet connector
B. Ventilation holes
C. Sample supply (stainless steel tubing)
D. Sample return (stainless steel tubing)
E. Main power supply
F. Analog outputs (4-20 mA)
G. Digital outputs
H. Status output (10 way connector)
Electrical/electronic signal connections to the analyzer are made through electrical
connectors located on the rear panel of the instrument, as shown in
Figure 2-5 . Use the
wiring diagram to make the electrical connections as shown in Appendix C .
Status outputs, 10 way socket (H) Table 2-1:
Pins Function
1-6 Status output 1 (check function), optional
2-7 Status output 2 (maintenance required), optional
3-8 Status output 3 (out of specification), optional
Install
Installation, Operations, and Maintenance Manual 17