ElektroPhysik QuintSonic 7 Technical Manual And Operating Instructions Download Page 98

Page: 98 / 184

QuintSonic 7

98 von 184

Again, the alphanumerical entry field appears. Now you can enter a
user name (see section 4.3.4 “Alphanumerical entries”).

This entry is optional.

Note:

It is not poss

ible to assign a name to the “Direct Mode “ batch.

A confirmation prompt will ask you whether to save the new user

name. Press OK to confirm or ESC to abort.

To complete the procedure, a confirmation prompt will ask you

whether to accept the settings from the currently active batch. Press

OK to confirm or ESC to copy other presettings or make new settings

The copy function facilitates the creation of a series of new batches or

to copy settings from the Direct mode.

The batch has been created and will appear on the directory tree.

For parameter settings see section 12.

Summary of Contents for QuintSonic 7

























































































































































































Search results

Summary of Contents for QuintSonic 7

Reviews:

ElektroPhysik QuintSonic 7, Technical Manual And Operating Instructions, Page: 98 / 184

Search results

Summary of Contents for QuintSonic 7

Reviews: