ElektroPhysik QuintSonic 7 Technical Manual And Operating Instructions Download Page 145

Page: 145 / 184

Data Output / Data Transfer

QuintSonic 7

145 von 184

14 Data Output / Data Transfer

QuintSonic 7 is equipped with two data ports:

RS 232 interface

Infrared (IrDA

1.0)

Readings and statistics of a batch can be transferred to a PC or printed-out on the data printer

MiniPrint 7000 (optional accessory).

14.1 Data print-out

Data transfer of readings and statistics to the data printer MiniPrint 7000 is made via the IR

interface (IrDA

1.0). Before print-out, make sure to adjust the gauge to IrDA

“. From Main Menu

go to “Setup” and select “Data Output”. Set to “Infrared (IrDA

)“ See also section 15.6.4.1.

Readings and statistics can be printed out from the statistics screens

“Numerical Statistics”, “Histogram” and “Readings”.

Press function key “Help/Extra” from any of these screens.

Select “Print” and press OK to confirm.

The “Printing Sequence“ window will open.

Select and adjust items 1 to 9 according as required. The sequence is

also user-adjustable (so, for instance, you can adjust two points only
such as “Statistics” and “Readings” only, as shown on Example #2).

Example # 1

The following options are available:

1. Company logo (either ElektroPhysik (gauge manufacturer) or

your own company logo. To include 160 x 80 pixel graphics

format ask for additional software option, not available at

present)

2. Name of batch / name of batch + date

3. Operator

4. Statistics (number of readings, average (

), standard deviation

(s), minimum, maximum, variation coefficient).

Summary of Contents for QuintSonic 7

























































































































































































Search results

Summary of Contents for QuintSonic 7

Reviews:

ElektroPhysik QuintSonic 7, Technical Manual And Operating Instructions, Page: 145 / 184

Search results

Summary of Contents for QuintSonic 7

Reviews: