ElektroPhysik QuintSonic 7 Technical Manual And Operating Instructions Download Page 134

Page: 134 / 184

QuintSonic 7

134 von 184

Once you have confirmed “Delete” by pressing OK, the selected
blocked domain will be deleted and the A-scan image refreshed

accordingly.

As a consequence, the false echo behind the second layer interface

echo will be used for processing again.

12.2.4 Expectancy domains

Expectancy domains are applied within the postprocessor function and

serve to associate tolerance bands to the layer interface echoes. Within

such tolerance bands, echoes can be expected. The tolerance bands

move according to the respective echo positions. Any echo located

between the expectancy domains will be marked as being invalid. On

the A-scan image they will be marked by the expectancy domain icon.

You can create, edit or delete expectancy domains.

Select the requested item from the menu and confirm your selection by

pressing OK.

Create an expectancy domain

Point of start is the A-scan image on the left. It has been created by

measurement of a 2-layer sample with the global clipping function being

enabled. No additional clipping domains have been defined so far. 3

layer interface echoes have been extracted with the first two echoes
representing “true” echoes while the third one has been extracted from
an interference.

For each “true” echo one expectancy domain is to be created in order
to suppress any false echoes located beyond these domains.

Summary of Contents for QuintSonic 7

























































































































































































Search results

Summary of Contents for QuintSonic 7

Reviews:

ElektroPhysik QuintSonic 7, Technical Manual And Operating Instructions, Page: 134 / 184

Search results

Summary of Contents for QuintSonic 7

Reviews: