ElektroPhysik QuintSonic 7 Technical Manual And Operating Instructions Download Page 101

Page: 101 / 184

Data Management

QuintSonic 7

101 von 184

The current batch will be associated with the parameter set you have

chosen. The name of the new parameter set is shown in the
“Configuration” submenu.

Option 2: via the measure mode screen

From the measure mode screen press function key “Configuration” to
call this submenu.

From this point proceed according to option 1.

Note:

This function mainly serves to assign a parameter to a new batch other than the “Default
parameter set”. Make sure the new batch does NOT contain any readings.

The parameter set of a batch containing readings should never be changed. Any changes to its

original parameter set would change the conditions for measurement.

As a result, the batch would contain a mixture of readings taken with the originally set parameters

as well as readings taken with the new parameter set. Hence, consistency of this batch would not

be given any more.

Summary of Contents for QuintSonic 7

























































































































































































Search results

Summary of Contents for QuintSonic 7

Reviews:

ElektroPhysik QuintSonic 7, Technical Manual And Operating Instructions, Page: 101 / 184

Search results

Summary of Contents for QuintSonic 7

Reviews: