ElektroPhysik QuintSonic 7 Technical Manual And Operating Instructions Download Page 114

Page: 114 / 184

QuintSonic 7

114 von 184

12.1.4.4

Ultrasound velocity

The system supports up to 5 layers. The sound velocity of layers can

be adjusted in this menu. To enter sound velocity, several options are
available (see 5.2 “How to calibrate for the sound velocity”).

Use arrow up/down keys to select the requested layer. It is of no
significance whether “Material” or “Sound velocity” are marked.

Press OK to confirm and call the entry method.

Entry options:



Direct (numerical entry)



Literature values (selection from a sound velocity table)



User values



Determine (Calibration): via target layer thickness and thickness

measurement

Make your selection and press OK to confirm and call the respective

submenu.

12.1.4.4.1 Direct entry

Select “Direct” to call a numerical entry field. Enter the value for sound
velocity. Unit of measure is m/s. For entry of alphanumerical para-

meter values please refer to section 4.3.4.

Summary of Contents for QuintSonic 7

























































































































































































Search results

Summary of Contents for QuintSonic 7

Reviews:

ElektroPhysik QuintSonic 7, Technical Manual And Operating Instructions, Page: 114 / 184

Search results

Summary of Contents for QuintSonic 7

Reviews: