© ElektroPhysik
QuintSonic 7
11 von 184
2 First Steps
This section is addressed to persons to use the gauge for the first time. It explains the main
features of the gauge and how to take readings. For a better overview and simplification, this
section will not discuss all details. For a detailed description of all subjects please refer to the
relevant sections later in this manual.
2.1 Insert batteries and connect sensor
Take gauge and batteries from the carrying case.
Push the battery compartment lid in direction of the arrow (as shown below).
Insert the batteries supplied with the gauge into the battery compartment. Respect polarities
(as shown below).
Push the battery lid over the housing and close housing.
Open the battery compartment
Insert batteries
Take the sensor form the carrying case and connect it to the sensor socket on top of the base
unit (see fig. below). Make sure the nib of plug is correctly inserted into the guide way of
socket. The red marking at the connector must be positioned correctly to the red marking of the
socket.
Fully engage the sensor plug into the sensor socket all the way to the stop.