© ElektroPhysik
QuintSonic 7
42 von 184
Select “Configuration” from the list.
Press OK to confirm.
The “Configuration” menu is active.
Select “Sensor reference measurement“.
Press OK to confirm.
To take a reference measurement, proceed according to the
instructions.
Once the procedure completed, the Measure Mode screen will
appear.
Option 2: via the Measure Mode screen
Press “Configuration“function key.
The “Configuration” menu will be active.
Proceed according the steps as descried under option 1.
6.4.2
Selecting a couplant
In ultrasonic coating thickness measurement, couplants are needed to provide optimum transfer of
ultrasonic wave energy between sensor and measuring object. Main target is to ensure both, a
maximum input of energy as well as a maximum output of energy (of the receiving signal). For this
purpose, the couplant must feature appropriate acoustic properties.