ElektroPhysik QuintSonic 7 Technical Manual And Operating Instructions Download Page 121

Page: 121 / 184

Setting Parameter Sets

QuintSonic 7

121 von 184

12.2.1 How to call the menu

From the Measure Mode screen, press function key „A-scan image“ to
call the A-scan image.

Press function keys Help/Extras.

The A-scan image menu appears listing the following parameter editing

options.



Clipping method



Clipping limits



Expectancy domains



Blocked domains

Select the requested item from the menu and press OK to confirm.

Please refer to the following section for more detailed information.

12.2.2 Clipping

12.2.2.1

Clipping method

Select requested clipping method and press OK to confirm and activate

your selection.

12.2.2.2

Clipping limits

Any further editing procedure depends on the clipping method you have selected. Please refer to

sections 12.2.2.2.1 to 12.2.2.2.3).

Summary of Contents for QuintSonic 7

























































































































































































Search results

Summary of Contents for QuintSonic 7

Reviews:

ElektroPhysik QuintSonic 7, Technical Manual And Operating Instructions, Page: 121 / 184

Search results

Summary of Contents for QuintSonic 7

Reviews: