© ElektroPhysik
QuintSonic 7
30 von 184
4.3.2
Setting selection parameters (Example: language)
Selection parameters offer more than two states.
Example: “Language” from the submenu “Setup\User Preferences”.
Select “Setup” followed by “User Preferences” and choose
“Language”. Press OK to confirm.
On the left of the options field an arrow up/down symbol will appear to
indicate that you can now set this parameter.
Use the arrow keys from the navigation block to scroll through the
options. Press arrow keys until you reach your requested option, e.g.
“English” and press OK to confirm.
Your setting has become active and the arrow symbol disappears.
If you do not want to change the setting, press ESC instead of
confirming by OK.
4.3.3
Setting a numerical parameter (Example: pos. clip-limit)
Some parameters require a numerical setting. Once you select such
parameter, a special entry screen will appear.
Example: “pos. clip limit” from the batch configuration menu. See
section 12.1.2.1 “Clipping”.
The ESC- and OK-keys assume navigation functions to the left/right.
The arrow keys assume their standard navigation function up/down.
The entry method is similar to writing a text message on a mobile
phone. Use ESC, OK or arrow key to move the cursor over the
numerical entry field. Once you have reached the requested value,
wait until the auto-save time delay has passed and the value will be
accepted automatically. The auto-save time delay can be set via
Setup/User Preferences/ Entry accepted: after….sec. See section
15.6.5.
If you wish to enter the same value again, just move the cursor to any
other value and go back immediately to the requested value. If you
have mistyped, you can delete the unwanted value from the entry line
by pressing the “Delete” function key. If necessary, press repeatedly.