© ElektroPhysik
QuintSonic 7
92 von 184
11.2 Data base
11.2.1 General remarks / How to call the data base
The Database facilitates data management of directories, batches and
their associated parameter sets.
Directories with up to 5 levels are available to store a maximum of 300
batches along with the associated calibration methods and parameters
settings. Via the directory you can choose configured batches, use
them for further measurements or open batches for output of statistical
information.
Press function key “Main menu” to call the main menu, followed by
data base. Press OK to confirm. All actions described hereunder will
start from this point.
11.2.2 Directories
11.2.2.1
How to create a directory
Use arrow keys up/down to move the cursor from its current position
(greyed out) to the place on the tree where you wish to create a new
directory. A new directory can be created at any place where the
greyed out cursor disappears and the flash symbol appears instead
(left screen). This is an intermediate position. A directory can be
divided in to subdirectories.
Once you have found the requested position, press the function key
“Actions”. Choose “New Directory” and press OK to confirm.