© ElektroPhysik
QuintSonic 7
91 von 184
11 Data Management
11.1 Introduction
11.1.1 Batches
QuintSonic 7 stores readings and statistics to batches. To each batch a certain parameter set is
associated. Such parameter set includes the setting parameters and the calibration stored for this
batch. If you open an existing batch, the parameter set associated to this batch will become active.
To create batches and parameter sets, select Main menu / Database. The data management is a
PC like file system. As usual, user definable subdirectories enable efficient data management.
Subdirectories, batches and parameter sets can be named as you wish.
A predef
ined batch is stored under the name “Direct Mode”. This batch is fixed. Neither can it be
deleted nor renamed (see 6.3.1). Use this batch for quick and rough readings and if there is no
need for data storage or data evaluation.
11.1.2 Memory capacity / using the data memory
The memory of QuintSonic 7 disposes of a data memory for at total of 300 batches and parameter
sets (e. g 200 batches and 100 parameter sets) to store a maximum of 250,000 readings.
Subdirectories with up to 5 levels are available to store and manage batches and parameter sets
conveniently. The memory can be divided into a user-definable number of batches. For instance,
you can use the complete memory for one batch only. Data storage is made automatically
according to your requirements, i.e. it is not necessary to predefine the size of a batch.
11.1.3 Parameter sets
To each batch a parameter set is associated. Such parameter set includes all relevant settings for
the respective measuring task:
Measuring range
Settings for echo signal processing
Sound velocities
Once you call a configured batch, the parameter set associated to it will automatically become
active.