EDM Solution 862, Installation Manual

Page: 218 / 262

218
Solution 862
Installation Manual
System Options 4
LOCATION 427
0
Option Description
1 Panel To Power Up Disarmed (If Power Reset)
2 Arm/Disarm Tracking On Power Up
4 Internal Crystal To Keep Time
8
Keyswitch Interface, Night Arm Station Or RE005 Installed
1
2
Table 128: System Options 4
Panel To Power Up Disarmed
If this option has been selected, the control panel will power up in the disarmed state once the
battery and AC mains have been reconnected after the system has been powered down.
If this option is not selected, the system will always power up armed in AWAY Mode.
Arm/Disarm Tracking On Power Up
If enabled, the control panel will keep its current armed status in non-volatile memory. If for
any reason the control panel is restarted due to a power failure, the control panel will return to
the armed or disarmed status that the control panel was in before the power failed.
Example
If the system was disarmed prior to the system being powered down, when the system is
powered back up, the system will return to the disarmed state.
Internal Crystal To Keep Time
If this option has been selected, it will force the control panel not to use the mains frequency as
a time base to keep time. The control panel will use the internal crystal (XTAL) to keep track
4
8
of time. This option is useful in countries that do not have a constant mains frequency.
Keyswitch Interface, Night Arm Station Or RE005 Installed
This option must be selected when using the Radio Key/Keyswitch Interface (CC813), 2
Channel Radio Interface (RE005), or the Night Arm Station (CP105). This option allows the
control panel to be operated using either of these three accessories. User Code 16 will be used
when reporting open/close reports via any of these accessories.
ISSUE130 Electronics Design and Manufacturing Pty Limited