EDM Solution 862, Installation Manual

Page: 127 / 262

Dialler Reporting Formats 127
Basic Pager Reporting Format
Basic Pager Format requires some interpretation of the numbers that appear on the display,
however, it is possible to differentiate between 1000 different control panels when a number of
control panels are reporting to the one pager.
How To Setup Receiver 1 For Basic Pager Reporting
1. "LOCATION 000 - 015" on page 131 requires the Basic Pager's access telephone
number programmed.
2. “LOCATION 034 – 039” on page 133 requires a Subscriber ID Number programmed.
3. "LOCATION 032" on page 132 requires "Option 5 - Pager Handshake" to be selected.
4. "LOCATION 033" on page 133 requires "Option 5 - Basic Pager Format" to be
selected.
How To Setup Receiver 2 For Basic Pager Reporting
1. "LOCATION 040 - 055" on page 134 requires the Basic Pager's access telephone
number programmed.
2. “LOCATION 074 – 079” on page 136 requires a Subscriber ID Number programmed.
3. "LOCATION 072" on page 135 requires "Option 5 - Pager Handshake" to be selected.
4. "LOCATION 073" on page 136 requires "Option 5 - Basic Pager Format" to be
selected.
Figure 6: Basic Pager Display
The example in "Figure 6: Basic Pager Display" shows that the transmission has come from
Subscriber ID Number 678 and that Zone 2 is in alarm, Zone 3 has been manually isolated, the
system is armed, the panic zone is normal, the AC is connected and there is no fault condition.
Electronics Design and Manufacturing Pty Limited ISSUE130