EDM Solution 862, Installation Manual

Page: 19 / 262

Introduction 19
How To Set The Date and Time
1. Enter your followed by
6
and the button.
Three beeps will be heard and the STAY and AWAY indicators will begin to flash.
2. Enter the day, month, year, hour and minute using the (DD, MM, YY, HH, MM) format
(i.e. DD = Day of the month, MM = Month of the year, YY = Current year, HH = Hour
of the day, MM = Minute of the day).
Please note that when programming the hour of the day, you will need to use 24:00 hour
format.
3. Press the button when finished.
Two beeps will be heard and the STAY and AWAY indicators will extinguish. If a long
beeps is heard, an error was made when entering the date and time.
+
6
+
+
DD
+
MM
+
YY
+
HH
+
MM
+
Example
If the date and time needs to be set for the 1st January 1997 at 10:30 PM, program the
date and time as follows;
2580
+
6
+
+
0
+
1
+
0
+
1
+
9
+
7
+
2
+
2
+
3
+
0
+
Electronics Design and Manufacturing Pty Limited ISSUE130