Instructional Literature
Page
88
Effective: May 2008
Instructions for the FP-6000 Protective Relay
For more information visit: www.eaton.com
IB02602004E
Table 20. Clock.
DISPLAY SETTING
DESCRIPTION
SETPOINT RANGE/
VALUE SELECTION
DEFAULT
SETTING
SELECTED
VALUE
REFER TO SEC. #
Clock
Time and Date
5.4.9
Date mode:
Select date format
MM/DD/YY or DD/MM/YY
0
5.4.9
Time mode:
Select standard time or military time
12 or 24
12
5.4.9
Year:
Select year
0 to 99
0
5.4.9
Month:
Select month
1 to 12
1
5.4.9
Day:
Select Day
1 to 31
1
5.4.9
Hour:
Select hour (set in 24 hour mode)
0 to 23
0
5.4.9
Minute:
Select minute
0 to 59
0
5.4.9
Second:
Select Seconds
0 to 59
0
5.4.9
Update Clock!
Press the “Enter” pushbutton
after setting clock to update the clock
Table 21. Communications.
DISPLAY SETTING
DESCRIPTION
SETPOINT RANGE/
VALUE SELECTION
DEFAULT
SETTING
SELECTED
VALUE
REFER TO SEC. #
INCOM
INCOM Communications Settings
5.4.10
Enable:
Enable INCOM communications
Yes or No
Yes
5.4.10
Address:
Select Communication address of FP-6000
1 to 0xFFE (Hex Value -increments of 1)
1
5.4.10
Baud rate:
Baud rate fixed at 9600 baud
Fixed at 9600 Baud
9600
5.4.10
Accessory Bus
Accessory Bus Address and Baud rate set-
ting
5.4.10
Address:
Select Communication address of FP-6000
1 to 0xFFE (Hex Value - increments of 1)
2
5.4.10
Baud rate:
Baud rate fixed at 9600 baud
Fixed at 9600 Baud
9600
5.4.10
RS-232
RS-232 Baud Rate Setting
5.4.10
Baud rate:
Select baud rate for RS-232 communications
9600, 19200,or 38400 Baud
19200
5.4.10