IB02602004E
For more information visit: www.eaton.com
Instructional Literature
Effective: May 2008
Page
203
Instructions for the FP-6000 Protective Relay
Figure 81. Flash Programmer.
Once S-Record File has been selected from the File drop down
selections, a message will be displayed to “Click Browse to get
the S-Record file”, (see Figure 82). Click the Browse button and a
file similar to “Fp5kapp.s19” (as an example) will appear, (see
Figure 83).
Figure 82. Flash Loader Open S-Record File.
Figure 83. Flash Loader.
Open the selected file. Once this has been accomplished this
screen will automatically close and the next screen will appear
asking the user to verify the selected file, (see Figure 84).
If verify is selected (highly recommended) a message will appear
at the bottom of the screen stating that “Verifying is in progress”,
(see Figure 85).
This should take anywhere between 10 to 60 seconds depending
on the file size. Once this has been completed the screen will
automatically close and the next screen will appear.
If close is selected the screen will automatically close and the
next screen will appear.
Figure 84. Open S-Record File.