Instructional Literature
Page
32
Effective: May 2008
Instructions for the FP-6000 Protective Relay
For more information visit: www.eaton.com
IB02602004E
4.6.1.5 Selecting the “Minimum” Sub-menu
This menu allows the user to view the following system
parameters (see Display 4.8 Minimum Sub-menu).
•
Minimum Currents (IA, IB, IC, IX, IR)
•
Minimum L-L Voltages (VAB, VBC, VCA)
•
Minimum L-N Voltages (VA, VB, VC)
•
Minimum Power (Watt, Var, VA)
•
Minimum Frequency
•
Minimum Power Factor (Apparent, Displacement)
The Date and Time Stamp is also recorded on the same page
with the minimum value display for each parameter occurrence.
Display 8. Minimum Sub-menu.
Table 7. Minimum Sub-menu.
The minimum values for each of the above parameters is
compared to the last minimum value for that parameter every
32 cycles. If the new value is less than the last minimum, the
value is updated. Power Factor Minimum is the most leading
power factor value measured.
4.6.1.6 Selecting the “Maximum” Sub-menu
This menu allows the user to view the following system
parameters (see Display 4.9 Maximum Sub-menu).
•
Maximum currents (IA, IB, IC, IX, IR)
•
Maximum L-L Voltages (VAB, VBC, VCA)
•
Maximum L-N Voltages (VA, VB, VC)
•
Maximum Power (Watt, Var, VA)
•
Maximum Frequency
•
Maximum Power Factor (Apparent, Displacement)
•
Maximum Reset Date & Time
Display 9. Maximum Sub-menu.
Table 8. Maximum Sub-menu.
The Date and Time Stamp is also recorded on the same page
with the minimum value display for each parameter occurrence.
The maximum values for each of the above parameters is
compared to the last maximum value for that parameter every
32 cycles. If the new value is greater than the last maximum, the
value is updated. Power Factor Maximum is the most lagging
power factor value measured.
Min <Variable>
(Variable)
Magnitude
Date
mm/dd/yy
Time
hh:mm:ss
Min Rst Date & Time
Date
mm/dd/yy
Time
hh:mm:ss
WHERE <VARIABLE> (VARIABLE) =
<IA Current>
(IA)
<IB Current>
(IB)
<IC Current>
(IC)
<IX Current>
(IX)
<IR Current>
(IR)
<Vab Voltage>
(VAB)
<Vbc Voltage>
(VBC)
<Vca Voltage>
(VCA)
<Va Voltage>
(VA)
<Vb Voltage>
(VB)
<Vc Voltage>
(VC)
<System Watts>
(MWatts)
<System Vars>
(MVAR)
<System VA>
(MVA)
<Frequency> (Freq)
<Apparent PF>
(Apt PF)
<Displacement PF>
(Disp PF)
Max <Variable>
(Variable)
Magnitude
Date
mm/dd/yy
Time
hh:mm:ss
Min Rst Date & Time
Date
mm/dd/yy
Time
hh:mm:ss
WHERE <VARIABLE> (VARIABLE) =
<Ia Current>
(IA)
<Ib Current>
(IB)
<Ic Current>
(IC)
<Ix Current>
(IX)
<Ir Current>
(IR)
<Vab Voltage>
(VAB)
<Vbc Voltage>
(VBC)
<Vca Voltage>
(VCA)
<Va Voltage>
(VA)
<Vb Voltage>
(VB)
<Vc Voltage>
(VC)
<System Watts>
(MWatts)
<System Vars>
(MVAR)
<System VA>
(MVA)
<Frequency> (Freq)
<Apparent PF>
(Apt PF)
<Displacement PF>
(DisP PF)
