![background image](http://html1.mh-extra.com/html/fandf/bis-404/bis-404_quick-start-manual_3071384001.webp)
- 1 -
BIS-404
Bistable relay,
sequential, 1-function
Electronic bistable pulse relay BIS-404 allows switching on or off
the lighting or other device from several different points by pa-
rallel connected, momentary (bell) control switches.
Relay has 2 switching sections and allows for switching of 2 light-
ning circuits (branches) or other receivers from several different
points and in accordance with the preselected sequence
The relay power supply is indicated by a green LED "U".
Sequential relay has 2 separate outputs: R1 and R2. Contact
status (closed/opened) is forced sequentially in accordance with
a predetermined program. Contacts switching to another state
after subsequent pulse from control button. R1 and R2 contact
activation is indicated by the relevant R1 and R2 red LED. After
a power failure, state of the contact is reset. When the power is
back on, the relay starts from the sequence number 0.
Purpose
Functioning
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: [email protected]
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Summary of Contents for BIS-404
Page 6: ......