Dynapac PL2000S, Operating Instructions Manual

Page: 200 / 228

D 140
D PL2
000.
G
B
14
0-
16
8 -
10.
0
1
6.5 Other settings
The levelling equipment is finely tuned to the machine. All parameters have been set
perfectly and ensure perfect operation so that under normal circumstances the user
will not have to make any changes to the pre-set values.
All values are checked again and changed if necessary when the machine is handed
over/during machine instruction.
Should faults nevertheless occur, various key combinations can be used to access
various menu items so that parameter settings such as:
- control precision level
- control width
- unit of measurement (centimetre, inch, foot)
- setting accuracy (transverse slope resolution in stages of: 0.1%; 0.05%; 0.02%)
can be checked and reset.
$
New parameter settings must
be saved once they have
been entered in the "levelling
unit" menu screen of the main
operating panel if they are to
be retained.
Please contact our service
team if you experience prob-
lems when setting the param-
eter values.
Terminal2.Tif/Savemask.jpg