Dynapac PL2000S, Operating Instructions Manual

Page: 226 / 228

D 166
D PL2
000.
G
B
16
6-
16
8 -
10.
0
1
Item Designation Brief description
1 Starter
Press to restart the engine.
To prevent the batteries from discharging, do
not press start button for more than 15 sec-
onds
The ignition on the main control panel must be
switched on. (Ignition key in position 1)
2
EMERGENCY
STOP button
Press in an emergency (people in danger, threat of
collision etc.)!
-
All functions of the emergency steering unit are
deactivated and blocked by pressing the
EMERGENCY STOP button.
To turn off the engine, an EMERGENCY
STOP button on the vehicle has to be pressed.
3
Preselection con-
troller
Travel drive
This is used to set the speed which is to be attained
when activating the direction of travel switch.
4
Switch
Direction of travel - Top shift position: forwards direction of travel
- Bottom shift position: reverse direction of travel
5
Front drive unit pair
steering movement
- Left shift position links: front drive unit pair is
steered to the left
- Right shift position: front drive unit pair is steered
to the right
Ensure that there is no-one in the machine’s
danger area!
6
Rear drive unit pair
steering movement
- Left shift position: rear drive unit pair is steered to
the left
- Right shift position: rear drive unit pair is steered
to the right
Ensure that there is no-one in the machine’s
danger area!
7
Raise and lower
discharge con-
veyor
- Top shift position: discharge conveyor is lowered
- Bottom shift position: discharge conveyor is
raised.
Ensure that there is no-one in the discharge
conveyor’s danger area!