Dynapac PL2000S, Operating Instructions Manual

Page: 112 / 228

D 52
D PL2
000.
G
B
52
-168
-
1
0
.0
1
Levelling screen
The following settings can be
made from this screen.
- Call up program for setting
off at grading depth (F2)
- Changeover from manual
to automatic mode on the
left side of the vehicle (F3).
- Changeover from trans-
verse slope controller to
height controller (and vice
versa):
-(F4) = left side
-(F5) = right side
If there is a changeover from transverse slope controller to height controller, the LED
display of the keys alters at the same time on the switch panel as well as on the lower
control elements.
- Nominal value adjustment for levelling on the right side of the machine (F6)
The screen for setting the
length of approach relative to
grade is called up by pressing
function key (F2) :
Four setting values can be al-
tered:
- Grade, left side of machine
(1)
- Distance to cover before
reaching the preset grade
for left side of machine (2)
- Grade, right side of ma-
chine (3)
- Distance to cover before
reaching the preset grade
for right side of machine (4)
- Select the desired value using the cursor keys.
The selected value is underlined on the display panel.
- This function is started or interrupted using the START and STOP keys on the ter-
minal. The switched status (5) is displayed.
Terminal2.Tif/ 3290028.jpg
Terminal2.Tif/ 3290085.jpg
1 3
2 4
5