Dynapac PL2000S, Operating Instructions Manual

Page: 174 / 228

D 114
D PL2
000.
G
B
1
1
4
-168
-
10
.0
1
Swivel-mounted warning sign
The swivel-mounted warning sign is lo-
cated on the rear of the machine, on the
right.
The sign should be swivelled out if this
side of the machine is on the offside,
closest to passing traffic or if the ma-
chine is driven on public highways.
- Slightly raise the warning sign so that
the detent pin no longer reaches into
the bore.
- Swivel the sign through 90° and lower
into the detent bore.
To transport the machine, fold in the warning sign. Danger of accidents, very wide ve-
hicle.
Tool holder
A console (1) is fitted on each of the in-
ner sides of the rear traction units. These
can be used to store bit boxes or tool-
boxes.
During operation, the parts needed can
be safely transported in this location.
During maintenance work, these areas
provide better access to tools.
209Rücksch2.tif
werkzeughalter.tif
1