Dynapac PL2000S, Operating Instructions Manual

Page: 65 / 228

D 5
D PL2
000.
G
B
5-
168
- 10
.0
1
Pos. Designation Short description
1
Control lever
upper conveyor
Controls the following functions of the upper conveyor
"Swivel", "Raise", "Lower". It also provides infinitely
variable control for the conveyor speed.
2
Control lever for
travel drive
Is used after system is unlocked for the purposes of
driving, steering and braking.
In conjunction with the appropriate activated automatic
function, when the lever is swivelled out, the Levelling
unit, water spray and cooling system and the appropri-
ate loading belt is activated or de-activated in neutral
position.
3 Switching table
Consists of an appropriately labelled keypad with pre-
defined push buttons for all work and inspection func-
tions. The operating status of the main functions is
displayed by means of LEDs.
The system also includes:
-
ignition lock
- rotary switch for work lighting and warning lamps
- EMERGENCY STOP impact switch
4 Display indicator
Used in conjunction with the menu bar to display actual
statuses, changes in setting values and to provide
information about malfunctions
5 Monitor
Enables the driver to view certain concealed areas of
the vehicle, i.e. areas which are otherwise outside the
driver’s range of vision.
At the touch of a button, any one of four video camera
in different positions can be selected in order to view
the desired section.
6
Contrast-
setting button
When the button is turned to the left or right, the moni-
tor’s contrast setting changes.
Depending on the angle of light, the screen can be set
to match the operator’s needs.
7 Reset button
For accepting the display settings, such as contrast,
light, dimmer and timer.
The button must be pressed to accept and save set-
tings if these have been changed.