Dynapac PL2000S, Operating Instructions Manual

Page: 204 / 228

D 144
D PL2
000.
G
B
14
4-
16
8 -
10.
0
1
When starting to grade without offset (i.e. lower machine gradually from zero to
the grading depth required):
- In semi-automatic mode, use the DOWN buttons (1) to set the nominal value 0 on
both digital controllers. Both controllers are jointly attached to one side of the ma-
chine. Activate automatic function of the levelling equipment via the main control
panel (control lever (2), function key (3), (4)) (AUTO (5) function lamp lights up) and
allow the machine to lower to height zero while at a standstill.
When the advance starts, use the DOWN buttons (1) to slowly set the nominal val-
ue and then use the function key (6) of the rear side operating units to "push" the
machine into the correct milling position.
Pult2new_a.tif/Pult3new.tif/Moba2.cdr/Moba30.jpg
6
2 4 3
1
5 5
1